|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| How to Order |
|
Adhesives, Hot Stuff Original, Super T & Special T, Tool Roll, Wood Patch, Devcon Epoxy Putty and Devcon Glue |
HOT STUFF An instant super glue with a good shelf life. Glues set up in a few seconds.
|
Hot Stuff Original
Hot Stuff™ and UFO™ Odorless THIN have a consistency resembling that of water and are used mainly for bonding parts which fit very well. UFO™ is odorless. Those who are sensitive to cyanoacrylate curing fumes will enjoy using new UFO™ in place of regular HOT STUFF™.
|
Hot Stuff Super T
Super 'T'™ has a consistency similar to that of syrup and has the ability to fill small gaps between parts which don't fit perfectly. SUPER 'T'™ cures at a slower rate than HOT STUFF™, (10-25 seconds depending on the material).
|
Hot Stuff Special T
Special 'T'™ and new UFO™ Odorless THICK are very thick cyanoacrylates with a consistency resembling cold honey. SPECIAL 'T'™ and UFO™ Odorless THICK have greater gap-filling ability than SUPER 'T'™ and more positioning time after contact of parts. The rate of cure is slow enough, (usually 50-60 seconds depending on the material), to allow precise alignment of parts, after assembly.
|
||||||||||||||||
|
NCFM Accelerator
NCF Quick™
Non CFC,
Rapid Flash-off, Stores Anywhere, No Evaporation Loss, Always Ready to Use. Glues set up in a few seconds. With one quick spray of NCFM accelerator, you have an instant bond. This is a good value, because it will last much longer than the liquid.
|
NCF-2M spray pump accelerator 2oz
The NCF Mild is our mild formula accelerator. NCF Mild decreases the curing time of the glue and forces the glue to cure when it wouldn't otherwise. This accelerator is active for several minutes, so you can spray several pieces at once if you are making multiple bonds. NCF Mild and Hot are generally not suitable for use with white foam. NCF-2M is a 2oz bottle with a plastic spray pump.
|
Super Solvent
|
|
Devcon two-part epoxy adhesives cure and join things together by a chemical reaction between the resin and hardener. |
Devcon two part epoxy glue
in Bottles 5-Minute fast drying Devcon epoxy glue
|
Devcon two part epoxy glue
in Bottles 2-Ton crystal clear Devcon epoxy glue 30-minute drying
|
| QuickWood | Kulis Karver Epoxy Putty | Famowood Wood Filler (Water Soluable) |
|
QuikWood Epoxy Putty Stick is a hand-kneadable, fast-setting polymer compound for permanent repairs to wood. It also bonds to metal, glass, masonry and many plastics. It comes in a handy "Tootsie-roll form with the curing agent encapsulated in the contrasting color base material. Break off a piece of the Putty Stick; kneed it and apply to the area desired. Much of the shaping can be accomplished during the working time (20 minutes). Can be sanded, drilled, stained, finished or carved. This is one of the best epoxy putty we have found. Works great for setting your bird eyes and sculpting other areas of the bird.
|
Kulis Karvit is a new product made especially for the wood carver. It is a two part epoxy that has the consistency of putty, but when cured, can be sanded, burned, carved, and etched. It can be feathered out to a thin layer and still not break. Kulis Karvit has superior bonding characteristics. Simply mix equal parts of the epoxy and hardener, and knead until totally blended. It's easy to smooth with water. Karvit will set up in about an hour, but should be left to dry overnight. If the hardener becomes too hard to work with, just put it in the microwave for about 30 seconds and it will soften. Kulis Karvit can create fleshy ring around eyes of a wood duck, or eyelids on all birds and animals. When set, it's impossible to detect that it's a putty and not the wood from which the decoy is carved. 8 oz. kit 1420100 Kulis Karvit - 2 Part Epoxy $9.95 |
Famowood Wood Filler allow for easy filling of holes and cracks. Like real wood and accepts both water and solvent based stains and finishes. Easily cleans up with water, stainable, and made from real wood. No harmful solvent fumes. We feel this is one of the best wood fillers on the market for matching your carvings. 1770001 Famowood Wood Filler Natural 6 oz $4.95 |
|
|
This tool roll is designed with 20
denim pockets that rolls up into a zippered pouch of denim. It holds tools
up to 11 inches long with room for plans, sketches and pencils. |
| 1380200 Tool Roll with Denim pouch ............................................... .................................................................... ............................................................................. ........ $28.95 |
|
Denim Tool Roll |
|
|
Tool Roll comes in two sizes: ∙
The standard size is a 12 Pocket heavy denim that holds up to 11 1/2" long tools.
mid-size tools (7 1/2" long)
including palm handles |
| 1380201 Standard Denim Tool Roll 12 pockets ................................................................................................ ....... .................................................................................. $15.70 | |
| 1380202 Small Denim Tool Roll 12 pockets ....................................... ...................................................................... ........................................................................ ......... $14.95 |
|
Shop Online!...Order by Mail!...Or Give Us a
Call!
1-800-752-9781 |
The Old Texas Woodcarvers Shop 24802 Red Oak Magnolia, Texas 77355 (281) 356-1311 otws@sbcglobal.net webmaster: Dallas Deege |
Ultra Solvent™ is a
remarkable debonder and cleaner for any instant glue. Use it for hand
clean-up when ever you are manipulating small parts with your fingertips
(instant glues make a thin, hard shell when cured on fingertips,
reducing one's ability to work skillfully with tiny pieces) or just to
get it off at the end of the day. Use Ultra Solvent™ to remove instant
glue from most clothing and surfaces. Some fabric, colorings or
materials may be affected, so test-patch on an inconspicuous place.
Ultra Solvent™ is not a thinner for instant glue.
